September 2, 2020 by Sherri Sylvester & filed under architecture & Patternmaking, Garment Construction, Sewing Blog.

You are watching: How to make a gymnastic leotard


Dancing is all around expressing yourself, so girlfriend (or your little one) require a leotard to help show off your punchy personality. Whether you want a funky sample or choose to go v a much more traditional color, making her own means you gain to customize the design, the fabric, the fit, the whole vibe.

The leotard you’ll make in this tutorial works perfectly for ballet, gymnastics and also all kinds of other dance and also fitness classes. You can use the same instructions to make a kids’ leotard or an adult bodysuit. The best part? There’s for sure no pattern needed.

Leotard

Level: Intermediate

What friend Need

Fitted bathing fit (for length and width)Fitted T-shirt (for sleeves and also neckline)Large paperPens or markers in a couple of different colorsFabric markerKnit cloth with 4-way stretch¼” elasticBallpoint needleRulerSeam gaugeScissorsPinsIron

Good come Know: If you desire a longer sleeve 보다 the one shown in this tutorial, you deserve to trace a long-sleeve T-shirt throughout the drafting process. Or you deserve to make a sleeveless leotard (or also a shower suit) by finishing the sleeve openings the same way as the neckline.

Instructions

1. Draft the Leotard Front

*

Fold her bathing suit in half along the next seams, with the front next out. Align the suit’s fold v the straight edge of your paper. Trace roughly the suit.

*

Turn the T-shirt within out and fold the in half. Wrinkles the sleeve back inside the bodice therefore the sleeve seam is exposed. Line the shoulder up through the bathing suit shoulder, and also the next seam v the next of the bathing fit line you just traced. Map the sleeve from whereby it meets the side seam to the bathing suit marking at the shoulder.

Pro Tip: because that tracing these 2 garments, the might assist to use different pen colour so friend can conveniently tell what markings you’re feather at.

*

Move the T-shirt so the wrinkles is along the sheet of the paper, v the shoulder tho aligned with the bathing fit markings. Map the neckline.

*

When you’re done, the file should look prefer the image above.

2. Include the Seam Allowance

*

Using a seam gauge, add ½” seam allowance to the crotch seam, sides and shoulders. Add a ¼” seam allowance at the neckline and also leg openings.

*

Mark the pattern item with a fold notation and include any other important info (like a brand that this item is the front). Cut it the end — you have the right to use it to draft the earlier of your leotard.

3. Breeze the Leotard Back

*

Trace the pattern because that the leotard front on another edge that the document to usage as a reference.

Refold the shower suit, this time through the back side out. Align it through the tracing of your front piece and trace any section that’s different (like the leg openings).

Make sure to add a ¼” seam allowance along the leg opened to account because that the previously added seam pin money from the traced leotard front. Make sure the crotch and side present still match up.

*

Draw in a lower earlier opening to permit for basic dressing there is no closures. The bottom that the brand-new curve have to be at least as low together the bottom of the sleeve opening. Include a ¼” seam allowance to the new back opened (the black line in the picture above).

*

Mark the pattern item with a wrinkles notation and also any other essential details.

4. Breeze the Sleeves

*

With the T-shirt still within out, fold it into the sleeve and also lay the folded edge along the straight edge of her paper. Map the curve and bottom edge of your sleeve.

*

Draw a 90-degree heat from the record edge to the finish of the sleeve.

*

Add a ½” seam allowance around the entire sleeve. Note the pattern piece with a wrinkles notation and also any other vital info.

5. Cut the Fabric

*

Use the pattern piece to reduced your fabric. Cut one front, one earlier and two sleeves ~ above the fold. Note the top facility of each sleeve as soon as it’s reduced out.

6. Sew the Neckline

*

Align the former and earlier shoulders, right sides together. Pin and sew the shoulders v a ½” seam allowance. Trim the seam allowance to ¼” and press open or come the back.

*

Measure out a item of ¼” elastic for this reason it’s the size of the entire neck opening.

*

Baste the elastic to the neck opening with a wide, lengthy zigzag stitch. Line up the edges of the neckline and elastic together you sew, making certain to no stretch the elastic or the fabric.

*

Turn the elastic under and also all the means along the wrong next of the neckline. Topstitch around ¼” away from the edge through a big or zigzag stitch.

7. Include the Sleeves

*

Press the sleeve hem under ½”.

*

Match the top facility sleeve marking with the leotard’s shoulder seam, ideal sides together. Pin the sleeves to the leotard sleeve opening.

*

Stitch every sleeve in v a ½” seam allowance.

Pro Tip: Stitch v the sleeve fabric next to your machine’s feeding dogs to help ease the sleeve in.

Trim the seam pin money to ¼” or push it toward the bodice.

8. Stitch the Sides

*

Place the leotard front, back and sleeves best sides together, aligning the next seams. Unfold the pressed sleeve hem and also stitch the next seams from the leg opening to the end of the sleeves v a ½” seam allowance. Trim the seam pin money to ¼” or push it towards the back.

9. Hem

*

Refold every sleeve follow me the pressed line. Hem the sleeves around ⅜” from the fold, using a zigzag stitch, large stitch or twin needle.

*

Stitch the crotch seam with a ½” seam allowance. Trim to ¼” and press it open up or towards the back.

See more: How To Get Tarnish Off Silver Ring, How To Care For Sterling Silver Jewelry

*

Baste and also stitch an ext elastic right into each foot opening, the same method you did through the neckline.

And there’s your snazzy brand-new custom leotard, all set to bust a move at the dance studio or gym!