Here is exactly how you can make your own water balloon launcher. We usage high strength surgical pipe unlike numerous of the launchers you have the right to buy virtual that don"t shoot an extremely far. The expense of products is around $18. This instructable covers just the launcher. See the Water Balloon start Pad because that instructions for the frame.

You are watching: How to make a water baloon launcher


*

Materials required: (1) little roll that duct ice cream (2) 8 customs lengths the 1/2" vinyl tube (2) 6 foot lengths the latex rubber surgical tubing The vinyl tubing deserve to be purchased from a hardware store. The latex rubber tubing deserve to be to buy online. One great source is McMaster part number 5234K75. It must be 3/32" wall surface thickness (not 1/16" thick). The surgical tubing offered at hardware stores is generally only 1/16" thick and also not strong enough to launch a balloon 300 yards. If you are in a pinch and also don"t have time to order the thicker tubing, climate you can double-up the 1/16" tubing, but that gets quite expensive.


*

Attach together 5 pieces of duct around 18 customs long. Wrinkles over the top and also bottom edges around 1/2" to create a hem. Take it 2 pieces of tape about 7 inches long and fold over one edge around 1/2" to produce a hem. Ar these 2 pieces through the hems encountering each other around 3 inch apart throughout the 5 piece of tape.


*

Place the 2 8" piece of tubing across the 5 pieces of tape about 8 customs apart. (The threaded stick in the snapshot is only used to save the tube straight throughout this step). Wrinkles the end of the 5 pieces of tape over the vinyl tubing and also adhere them earlier on themselves.


*

Make a handle by attaching 2 piece of tape around 22" long lengthwise. Then fold or role them lengthwise into a 1/2" vast strip.


*
*

Cut two 1/2" slits 3 inches personal in the middle of the pouch. Perform not reduced through the hemmed tape embedded in the pouch, rather reduced right beside it. Insert the handle through this slits. Leaving a loop the the manage sticking up big enough to quickly fit your hand into.


Wrap the ends of the handle approximately the pouch, overlapping the loop of handle that was produced in the ahead step. Certain the overlapped parts of the take care of together by wrapping them through tape.


Insert the surgical tubing through the vinyl tubing channels and tie every one along with a square knot.

See more: 10 Ways To Ask How To Say How Are You In Korean (And Responses)


This is a 3-man launcher but we"ve fastened it to the Water Balloon beginning Pad which just requires one person to load and also launch. Have fun!


This is a an excellent idea because that a handy man looking to have some fun. I wouldn"t simply want to trust surgical tubing and duct tape when there room plenty of all set made water balloon launchers the end there. This one looks nice good. Http://www.frattoys.com/400-yard-water-balloon-launcher.html.