If your mailbox is dangerous, damaged, or doing not have security, it’s time to change it.

You are watching: How to remove a mailbox post

Whether it’s for your house or business, it’s a simple process that you can easily achieve in a couple of hours.

Before we acquire into how to change a mailbox, you’ll want to make sure you bespeak a new one and also have it before you begin. If you’re transforming the size or ar of the mailbox, you’ll need to check in with your local post office to obtain it approved.

Other 보다 that, here are 5 basic steps to gain the task done.

1. Remove the Old Mailbox

Luckily, mailboxes have actually been extensively used since 1863. This method that plenty of civilization have replaced their mailboxes, simple the process over time.

First, you’ll desire to eliminate the box. This might require various tools, such as a screwdriver and also a socket wrench, depending upon your collection up.

Once that’s removed, it’s time to obtain the old write-up out. Take a shovel and also dig approximately the write-up to ease the soil.

Dig and wiggle the post about until you can acquire it out. If it’s really in there, you may need to include some water come soften the soil.

If the short article is placed in concrete, you’ll have to dig about that, too.

2. Change the article Hole

If over there are any type of differences in size in between your old and brand-new posts, you’ll want to change by digging the end or including soil.

The hole need to be no more than 24 inch deep and also the bottom of her mailbox must be between 41 and 45 inches from the peak of the road.

These regulations are in ar to do the postman’s project easier. There are around 187.8 million pieces of mail yielded every day, ~ all.

Refrain from using concrete uneven absolutely necessary. It will certainly make it harder to replace the article in the future.

Instead, you’ll desire to heat the bottom of the feet with about 4 inch of gravel come promote proper water drainage. Be sure to encompass this in her measurements.

3. Prepare Your new Post

Depending ~ above the mailbox friend get, you may need come treat the short article to protect against water damage.

Most contemporary wood articles are press treated and also weather-resistant yet be certain to double-check. Girlfriend don’t want it come rot prematurely.

Besides using a wood 4×4 post, you might use a steel or aluminum article that’s 2 inch in diameter.

4. Put the post In the Hole

Rest the post in the hole and also re-measure the street from the roadway to the bottom the the box. It’s far better to perform this before you include soil about the post, in situation you need to include or eliminate soil.

If the lines up, put a level on top of the post and also begin pour it until it is full the hole through soil. To fill it v 6 come 12 inches in ~ a time, packing every layer under as you go.

This will prevent the write-up from being loosened and wobbling around.

5. How to replace a Mailbox: The final Steps

Once your post is secure, attach the box to it using mounting brackets.

The mounting brackets, bolts, and also nuts compelled should come with your brand-new mailbox.

Some mailboxes connect to the top of the post or prolonged arm, if others mount underneath the eight to hang.

Once it’s secure, you’ll add the finishing touches. This means putting your residence number ~ above the sides or ~ above the opened of the mailbox.

If her mailbox is top top a different street, you’re forced to list your complete street address.

Enjoy Your brand-new Set-Up

Now the you know how to replace a mailbox properly, you shouldn’t have to worry around it because that a lengthy time.

Try come recycle your old post and also box in ~ a regional recycling center.

If friend haven’t yet chosen your new mailbox, inspect out our residential and commercial options.

See more: How To Get More Candy On Halloween, New Horizons (Acnh)

Keep reading our blog for more tips and information on whatever related come snail mail.