You are watching: How to take a wii apart
Turn off her Wii and also unplug every cords and cables native the system.
Flip the Wii upside under so the serial number of the Wii is facing up.
Remove the plastic flap spanning the Wii ports. The flaps room white and silver and can be eliminated by hand without lot force.
Remove the tiny Phillips-head screw ~ above the battery compartment. Then remove the battery and also battery tray from the device.
Locate three rubber feet over the battery tray and pull castle off through your fingers. As soon as the feet room off, you will check out a screw hiding under each one.
Remove the 4 white stickers on the bottom of the console. Girlfriend will see a screw hiding underneath each sticker.
Use your Tri-wing and also Phillips screwdrivers to remove these 7 screws top top the bottom the the Wii.
Turn the Wii over to its best side. Locate and also remove the 2 rubber feet and also two white stickers.
Remove the 2 silver Tri-wing screws from inside the feet on the silver Wii bezel (or faceplate) ~ above the right side. And remove two an ext black Tri-wing screws native the silver- bezel.
Open the Wii faceplate sheathe to eliminate a black color faceplate underneath. Then wiggle the end the two socket consist of on the black color faceplate v your fingers.
Remove the 3 black Phillips screws from the black color faceplate. Then pull the black faceplate far from the base. It is in careful because it is still associated by red and black wires.
Pull the red and white wire connector indigenous its real estate inside the the device with her hands. Friend will now have accessibility to a white panel inside.
Remove 2 silver Phillips and also two Tri-wing screws from the white panel. You are currently ready to eliminate the right instance hood the the console.
Turn the Wii therefore its right side is facing up. Progressively pull the entire right case hood off. It may take some force. If it appears stuck, verify the you have removed all the screws.
Remove 4 Phillips screws native the software reader after you have removed the best panel cover. Two of the screws are located in the middle of the software application reader. Two space at the sheet of the reader towards the prior of the Wii.
Pull up the software program reader. Be careful since it is still associated by a white cable cable and a gray ribbon cable. Pull the white wire cable connector out of the motherboard. Climate lift the brown capture on the connector to release the gray ribbon cable. Now you can remove her DVD reader.
See more: How To Get A Fly To Land - How To Kill Flies In Your House
The within of the Wii is perceptible to static. Discharge you yourself by poignant a steel object before you begin to take it apart her Wii.